Finishing Heat Setting Stenter , vertical / horizontal chain , customized
1. Stenter General Application:
This stenter can be applied to any fabric stretch or heat setting. It is suitable for wool spinning, cotton spinning, knitting, chemical fiber, garment fabric, industrial textiles etc.
2. Main technical index
| Main Matching Fabric | open width fabric (70~350g/m²) made
of cotton, cotton/polyester,wool,synthtic fiber and
other blended fibers |
| Heat source | natural gas/circulating conduction oil/steam/electricity/combined |
| Stentering type | hot air circulating |
| Holding type | pin/clip/combined |
| Chain type | oil-free lubricated/ lubricated |
| Rail type | carbon steel+polymer wearing strip |
| Working type | horizontal/vertical return chain |
| Working width | 800-3600mm |
| Working speed | 5-100m/min |
| Chamber Nos | 1-12 |
| Chamber width | customized |
| Insulating board thickness | 150mm |
| Temperature of chamber | 100~230ºC |
| Pinning & brush overfeed ratio | -30%~80% |
| Temp.& width adjustment type | separately adjust on each chamber |
| Capacity of machine | 61.5kw+22.75kw*chamber*Nos |
| Standard machine power supply | 380V/3P/50HZ;220V/3P |
| Control power supply | 220V/24V |
| Steam specification of steam box | 3-6kg/cm² |
| Steam comsuption of steam box | 100-150kg/h |
| Compressed air | 0.35-0.6MPa |
| Total weight | 14T+5.8T/chamber*Nos |
3. Features of the machine:
1) Permit high production speeds with high efficient chambers.
2) By virtues of advanced PLC system and computerized control with interface operation, the machine is easy to be operated.
3) The best design of airing system makes it possible to adopt the air circulation quantity penetrates to the fabric uniformly, the handle of fabric and softness can be increased.
4) Thanks to the exhaust-air inverter control system, the energy can be saved and the high production can be get with efficient cost.
5) Each rail width of setting chamber can be adjusted by seperated driving motor at the same time or independently at different time.
6) The infeed to delivery zone can be extended by variable fabrics treatment requirement.
4. Machine flow-chat:
1) Process flow for some special product
Open-width entry --- Expanding---- Photocell device & uncurler device--- pinning-on ---- Chambers for heat setting ---Air cooling --- pinning -off ---- End section --- Roll.
2) Process flow for knitted fabrics
Feeding frame-> infra-red centering-> two-bowl oblique padder-> pneumatic fabric tensioner-> four-roll weft straightener-> lower overfeeding-> mechanical weft straightener-> bow roller expanding-> upper overfeeding-> infra-red selvedge-detection-> three-finger uncurling and plate uncurling -> brush overfeeding-> pinning -> extended rail-> heat-setting chambers-> air cooling-> tension adjustment-> batcher and plaiter
3) Process flow for woven fabrics
Feeding frame-> infra-red centering-> two-bowl oblique padder-> pneumatic fabric tensioner-> photoelectric weft straightener-> lower overfeeding-> upper overfeeding-> infra-red selvedge-detection-> two-finger uncurling-> pinning -> heat-setting chambers-> air cooling-> tension adjustment-> water cooling-> plaiter
Product Tags:
|
|
Finishing Heat Setting Stenter Horizontal Chain Textile Stenter Machine Customized Images
|
